BMW E53 X5 4.8is V8 (N62) '05 -> '06

Supersprint is proud to offer the best headers system for the Classic BMW  X5 4.8is  V8.

The N62 engine has huge potential, unfortunately it is chocked down by an overly restrictive factory exhaust, courtesy of the stringent emission regulations.

This was the first, newer generation BMW V8 engine equipped with the factory catalytics placed harmfully close to the engine.

This design hurts the exhaust gas flow so bad, that it totally wreacks havoc on the performance, killing both the torque in the low / mid rpm range and the peak hp.

Unfortunately, this exhaust makes no justice to this BMW high peformance SUV.

The Supersprint long tube headers system, with its downstream re-located, high flowing HJS Motorsport catalytics, provides for an astounding gain of + 35 Hp, and + 50 Nm torque.

Also, with the addition of the Supersprint resonator + rear mufflers, the engine finally makes the deep roar everyone is expecting from.

As usual, Supersprint guarantees ease of installation, and a long life, thanks to the multi-piece primary tube design, and the Patented, proprietary floating-flange sealing system.

Each and every Superspint headers and exhaust part is hand built individually, at our Factory in Italy.

Supersprint always means one man, one exhaust.

Systems for replacement of kat for OBD II car models (with lambda sensors before and after the kat.)

These systems can only be used for racing purpose exclusively, in conjunction with the modifications of the engine management system. If used with a stock “ECU”, malfunctions may occur. All modifications must be carried out by qualified personnel only, under the liability of the car owner and at his expense.

Supersprint guarantee is limited to the quality, workmanship and correctly fitting to the intended car model for all race products.