Find the Supersprint exhaust for your car
car brand
Audi
series
AUDI A4
car model
AUDI A4 B6/B7 '01 -> '07

AUDI A4 (Sedan + Avant) 1.9 TDi (101Hp - 130Hp) '01 -> '07

Exhaust system

Filter by
Components
Price (€)
446
669
Features

Oversize 1 x Ø 63,5mm –› 2 x Ø 50mm system with Right + Left exit 100% Stainless steel. - This exhaust system must use the OEM rear bumper's lower lip from the A4 1.8 Turbo, and the OEM right side rear muffler hanger

Centre pipe.
€ 446.00 + VAT
€ 530.74 VAT INCLUDED
Centre pipe.
Cod: 763613
Must be installed with 763604 and 763634
Availability on demand
Compatible with the OEM catalytic converter
Rear exhaust Left O 90.
€ 669.00 + VAT
€ 796.11 VAT INCLUDED
Rear exhaust Left O 90.
Cod: 763634
Must be installed with 763613
Availability on demand
With ECC HomologationCompatible with the OEM catalytic converter
Rear exhaust Right O 90.
€ 669.00 + VAT
€ 796.11 VAT INCLUDED
Rear exhaust Right O 90.
Cod: 763604
Must be installed with 763613
Availability on demand
With ECC HomologationCompatible with the OEM catalytic converter

alias: Sports exhaust for

100% Stainless steel system
With ECC HomologationWith ECC Homologation
Component E.E.C. homologation valid only when fitted to the specific Supersprint homologated rear exhaustComponent E.E.C. homologation valid only when fitted to the specific Supersprint homologated rear exhaust
Compliant to the noise regulation 70/157/EEC.<br /> However the specific model or engine type may not be included within the official list of vehicles this exhaust is legally issued for.Compliant to the noise regulation 70/157/EEC.
However the specific model or engine type may not be included within the official list of vehicles this exhaust is legally issued for.
Compliant to the noise regulation 70/157/EEC.Compliant to the noise regulation 70/157/EEC.
Compatible with the OEM catalytic converterCompatible with the OEM catalytic converter
Discontinued Product. Available while stock lastsDiscontinued Product. Available while stock lasts
Threaded bung for oxygen sensor providedThreaded bung for oxygen sensor provided
With certificate of conformity for classic exhaust designWith certificate of conformity for classic exhaust design
Systems for replacement of kat for OBD II car models (with lambda sensors before and after the kat.)

These systems can only be used for racing purpose exclusively, in conjunction with the modifications of the engine management system. If used with a stock “ECU”, malfunctions may occur. All modifications must be carried out by qualified personnel only, under the liability of the car owner and at his expense.

Supersprint guarantee is limited to the quality, workmanship and correctly fitting to the intended car model for all race products.
auda430