AUDI A3 8V 1.6 TDI (105 Hp) 2012 -> 2014

Exhaust system for Audi A3 8V 1.6 TDI.

The stock exhaust system is not equipped with a centre resonator, and there's a flow control valve in the middle section, for this reason only the rear section is available, in silenced homologated version or pipe-only, for a more aggressive sound.

The left side only system is available with a single round exit, which doesn't require any modification to the diffuser, or with oval or twin round exit, which requires to trim the valance to enlarge it on the non-S-Line models. On S-Line models the rear diffuser for the 1.4TFSI/2.0TDI model is necessary. On non S-Line model is also possibile to fit the diffuser for the 1.4

The system with dual oval tips or quad pipes Ø80mm is designed to fit on non S-Line models, cutting the valances in the diffuser.

On S-Line models the S3-Style system is recommended, fitting the S3 diffuser

Systems for replacement of kat for OBD II car models (with lambda sensors before and after the kat.)

These systems can only be used for racing purpose exclusively, in conjunction with the modifications of the engine management system. If used with a stock “ECU”, malfunctions may occur. All modifications must be carried out by qualified personnel only, under the liability of the car owner and at his expense.

Supersprint guarantee is limited to the quality, workmanship and correctly fitting to the intended car model for all race products.