Find the Supersprint exhaust for your car
car brand
Audi
series
AUDI A1
car model
AUDI A1 8X (2010 -> 2017)
Cod: 768902

Front Metallic catalytic converter.

Front Metallic catalytic converter. for AUDI A1 1.4 TFSi 3 Doors / Sportback (185 Hp) 2010 -> 2014

Availability on demand
$ 1,757.00
buy
  • Description
  • Legend
Supersprint front pipe with high flow metallic cat by HJS  Motorsport, Made in Germany http://www.hjs-tuning.de/en/3/105/0/seite_1/Technics/Sport-Catalytic/sport_catalytic.html

This component is designed to be fitted with the turbo downpipe 768911.
As the original catalytic converter palced close to the turbocharger is removed, this results in a catless exhaust system, with the typical smell and not compliant with the pollution regulations in many countries.

Fitting the Supersprint front pipe with sports cat the pollutant gas will be reduced efficiently.
The different position, under the frame instead of inside the engine bay, is also good for performance and for temperature, as the cat can exchange heat with the air flow instead of soaking the engine bay with it.

It's necessary to extend the secondary O2 sensor wire to be able to plug it in the bung after the new cat, unless the sensor itself is turned off by ECU tuning or cheated with an emulator / microcat.

The HJS metallic cats are the best on the market, with the highest concentration of noble metal, with the best pollutant gas reduction and performance gains.

To be able to fit this part with the OEM centre pipe the outlet diameter must reduced from 60 to 55mm.
Please specify this when you order the part.
With ECC Homologation
With ECC Homologation
Component E.E.C. homologation valid only when fitted to the specific Supersprint homologated rear exhaust
Component E.E.C. homologation valid only when fitted to the specific Supersprint homologated rear exhaust
Compliant to the noise regulation 70/157/EEC. 
However the specific model or engine type may not be included within the official list of vehicles this exhaust is legally issued for.
Compliant to the noise regulation 70/157/EEC.
However the specific model or engine type may not be included within the official list of vehicles this exhaust is legally issued for.
Compliant to the noise regulation 70/157/EEC.
Compliant to the noise regulation 70/157/EEC.
Compatible with the OEM catalytic converter
Compatible with the OEM catalytic converter
Discontinued Product. Available while stock lasts
Discontinued Product. Available while stock lasts
Threaded bung for oxygen sensor provided
Threaded bung for oxygen sensor provided
With certificate of conformity for classic exhaust design
With certificate of conformity for classic exhaust design